Boss Snowplow. $99 Install Special

JD Equipment is an official dealer of the Boss Snow plows and offering central Ohio a special $99 installation offer.
Boss is the leader in industry for snow and ice removal equipment.

2017 Honda Power Equipment WB30

$669.95


Availability
Call for Availability
Year
2017
Manufacturer
Honda Power Equipment
Model
WB30

Overview

Description

Key Features
  • General purpose, centrifugal 3" pump
  • Easy starting Honda OHV commercial engine
  • 290 gal./min. capacity
  • Silicon carbide mechanical seal
  • Cast iron volute and impeller
Features
  • Easy starting Honda OHV commercial engine: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • Durable silicon carbide mechanical seal: The WB30 features abrasion-resistant silicone-carbide seals for extended wear.
  • 4 vane high efficiency impeller: The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
  • Cast iron volute: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
  • Heavy duty full frame protection: Protects the pump, while offering a convenient tie down location for transport.
  • Isolation mounted engine and pump: High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
  • Protected by Honda Oil Alert®: Protects the pump by shutting the engine off when low oil is detected.
  • 3 year residential/commercial warranty: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
  • Large strainer: The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
Specifications
  • Engine: GX160
  • Displacement: 163cc
  • Bore and stroke: 2.7 in. x 1.8 in.
  • Compression Ratio: 9.0:1
  • Oil Alert: Std
  • Pump type: Centrifugal, Self-priming
  • Volute: Rigid Mounted Cast Iron
  • Impeller: 4 Vane Cast Iron
  • Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
  • Priming time: 150 sec @16.4 ft.
  • Drive system: Direct
  • Discharge capacity: 290 gal./min
  • Suction port diameter: 3 in. NPT
  • Discharge port diameter: 3 in. NPT
  • Total head lift: 85 ft.
  • Suction head lift: 25 ft.
  • Maximum pressure: 37 psi
  • Solids handling: N/A
  • Dimensions (LxWxH): 20.1 in.x 15.2 in. x 17.9 in.
  • Dry weight: 57 lb.
  • Fuel Capacity: 0.82 gal.
  • Run Time @ Max Discharge: 1.9 hr
  • Strainer Part #: 78325-YG4-000
  • Residential Warranty: 3 years
  • Commercial Warranty: 3 years
Accessories
  • A wide variety of hose kits, couplers, adaptors, and other accessories are available.

Specs

Engine

Engine Type
GX160
Engine Manufacturer
Honda
Engine Displacement
163cc
Bore and Stroke
2.7 in. x 1.8 in.

General

Pump Style
Centrifugal, Self-priming
Impeller
4 Vane Cast Iron
Drive System
Direct
Discharge Capacity
290 gal./min
Discharge Port Diameter
3 in. NPT
Suction Diameter
3 in. NPT
Head Lift
85 ft.
Suction Head Lift
25 ft.
Max Pressure
37 psi
Dimensions
20.1 in.x 15.2 in. x 17.9 in.
Weight
57 lb.

Promotions



Related Products